Hikvision DS-3E1510P-SI 8 Port Gigabit Smart POE Switch

Specification General Shell Metal material Net Weight1.21 kg (2.67 lb) Gross Weight1.3 kg (2.87 lb) Dimensions (W × H × D)217.60 mm × 27.80 mm × 108.55 mm (8.57” × 1.09” × 4.27”) Operating Temperature0 °C to 40 °C (32 °F to 104 °F) Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F) Operating Humidity5% to 95% (no condensation) Relative Humidity5% to 95% (no condensation) Power Supply48 VDC, 2.5 A Installation ModeDesk-Mounted,Wall-Mounted Max. Power Consumption120 W Power Consumption in Idle7 W Surge Protection6 KV Network Parameters Ports8 × Gigabit POE port,2 × Gigabit fiber optical port MAC Address Table8 K Switching Capacity20 GBPS Packet Forwarding Rate14.88 MPPS Internal Cache4.1 Mbits PoE Power Supply POE Standard IEEE 802.3af,IEEE 802.3at POE Power Pin End-span: 1/2( ), 3/6(-); POE Port POE: Ports 1 to 8 Max. Port Power30 W POE Power Budget110 W Software Function Long Range Ports 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition. Port Isolation Ports 1 to 8: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. PoE Watchdog  Ports 1 to 8: auto detect and restart the cameras that do not respond. Link Aggregation Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups. Loop Prevention Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. QoS QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode. VLAN VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN. HPP Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. System Maintenance Remote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import and export configuration, time sync Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion. Storm Control Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets. Approval EMC FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013 A1: 2019, EN 50130-4: 2011 A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015) Safety UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 A11: 2009 A1: 2010 A12: 2011 A2: 2013, EN 62368-1: 2014 A11: 2017) Chemistry CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)